How many of you out there have run some spools of INEFIL wire?

admin

Planning on some of the consumables I will pick up here to go along with my miller 211 and saw over on Amazon a lot of people seem to like the INEFIL wire made in Italy.  I know I can get Lincoln at my local big box hardware store in some cases and Hobart chi com at my LWS.  Something intrigues me about the Italian made stuff, mainly that it is not made in China :roll eyes: and it is also fairly affordable especially with Prime but that does not necessarily make it any better.  Any opinions.
Reply:I really like the wire..As good as anything out...That means L-56, and spool-arc 86..Esab/Lorch ET-220iEsab 160i caddyThermal LM-200 Lincoln feedersThermal Pee-Wee 85sThermal 60i- 3phase /RPC powered (Beast)Thermal Drag-gun 35CINE 1500 Klutch 140i
Reply:I think some of the Harbor Freight wire back in the day was INE - and it was apparently good stuff. I would not be surprised if the HTP wire is, or was, INE."USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:Originally Posted by OldendumI think some of the Harbor Freight wire back in the day was INE - and it was apparently good stuff. I would not be surprised if the HTP wire is, or was, INE.
Reply:Originally Posted by OldendumI think some of the Harbor Freight wire back in the day was INE - and it was apparently good stuff. I would not be surprised if the HTP wire is, or was, INE.
Reply:Scott, I wasn't too bad, "back in the day"'. But, like me, that wire might not be wrapped too tight these days. Eh?"USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:Originally Posted by OldendumScott, I wasn't too bad, "back in the day"'. But, like me, that wire might not be wrapped too tight these days. Eh?