|
|
Hey all,I have this 3m 9002x Speedglas. It's flexview and has the adflo respirator. The respirator has the particulate and organic filter installed. It is in used condition and it has served me very well. I'm not welding as much anymore and have decided to switch over to a passive lens, so it's time for this to go.The battery still charges great, it seems to run forever. Please note that I am just a hobbyist weldor. That said I have never had problems tig welding with this mask. It's comfortable and the Adflo keeps you nice and cool. With the organic filter I can't smell burning rod at all, it's like you're just relaxing at your kitchen table and welding at the same time!The only bad thing about it that I can think of, is the mask doesn't like to stay up. It likes to slide back down. So when I use it, I generally just leave it down and use the flexview part instead. I've had this thing down for 5 hours at a time and never get fatigue from anything. Everything you see is included (except for the driveway). Hard to see, but included are, extra grinding plates, and extra prefilters.If I don't get any bites it will be going on ebay.I'm asking $825 for it, but if you have a better idea let me know. These are over $1300 new without the organic filter (says a quick Google search).I'm also looking for a foot pedal for my Maxstar 150STL, so partial trades are more than welcome.Thanks for looking and feel free to make an offer. It's just sitting here and I've got a few projects that could use some extra capital. Best wishes all and have a great weekend! Last edited by Taiden; 05-06-2011 at 09:20 PM.
Reply:i weld for a living and cant afford that Daniel
Reply:Originally Posted by pwtengi weld for a living and cant afford that
Reply:ya i just cant compete with the chinese and the mexicans any more and my clientel keeps wanting walmart pricesDaniel
Reply:I'm considering all offers. This will be on ebay pretty soon if no one here is interested.
Reply:I've got a hood exactly like that one. It took me a minute to get used to the flip up lens, but I got used to it. Before you go through the hassle of ebay throw a number at me. If I like it I will bite. You can send me a PM if you prefer. I will figure on adding shipping to your number. UPS would be preferred.Thanks.
Reply:Sold, thanks everyone!
Reply:Got a "note" from the PO today. My local PO is only open from 10-2 but the wife should be picking it up for me tomorrow. I am looking forward to peeling open the box.
Reply:Got the box today. Thanks, Taiden. The only "problem" was the pony express managed to knock the latch for the primary filter out. Not sure how they did it but I snapped it back in. It wasn't a loose fit, it went in pretty tight so I'm not sure how they managed it. But anyways, thanks again. Welderboyjk
Reply:Sorry about that Welderboyjk, I'm glad it all worked out in the end. Best wishes and enjoy your new 'portable welding booth'!
Reply:No deal at all. I just "popped" it back into place. |
|
发表于 2021-8-31 22:21:16