1986 Dodge Ramcharger 4x4 Sale or Trade

admin

Ok I know this is a welding forum but if its not frowned upon I would like to try & trade this ole truck for some welding goodies. If anybodys interested in buying or trading please let me know. Thanks(I just copied the listing from another site I have it listed for sale on.)1986 Dodge Ramcharger 4x4, 318 motor, good tires, runs & drives, 4 wheel drive works fine. Excellent idea for a mud/hunting truck but would also be ok for an everyday vehicle with work. We have had this truck about 4 years and it has set up for about 4 years. We do not use or have not used this vehicle on a daily basis. It's in dire need of some TLC. As for the work that is mentioned above, it's mostly cosmetic. It will need a new battery, the one thats on it now has a dead cell and doesnt stay charged. Also it will need a master cylinder and more than likely a rebuild of the carburator. The outside, drivers side, door handle needs to be replaced along with the seal around the windshield. The interior isn't great. The drivers seat is out of a different vehicle and the passenger seat is torn. The back seat is ok but has some stains. The carpet isn't really much count and the headliner needs to be replaced. The original gages have been covered up, so there is only an amp, oil press., & temp gage. There is no key switch. That means there aren't any keys. Tires are in great shape, hold air, and have lots of life left in them. All the glass is good, no cracks. The 4 wheel drive works fine and the transmission seems to be ok as well. No rust on the body and no dents however, there is a small bullet hole near the gas tank. All of this information is to the best of our knowledge. As I said before the gages are covered up so there is no way for me to know the exact millage. The title says od exempt and the history report showed that when last registered, 09/15/2006, it was said to have 165,320 on it. The thing to remember when looking at this vehicle is that it is what it is. If you have any questions, feel free to ask. I can arrange to have the vehicle delivered, at the buyers expense, by a professional transport service. The rate for the company I use is $3.25 a mile to any location inside the continental US. Of course local pickup is available if you so desire. Payment must be made in full before the vehicle will be released. $1000 FIRM or trade. Just let me know what you got. Attached Images