|
|
Hi all -My HF band saw is being annoying. I had a gift card to amazon so I picked this up:http://www.amazon.com/gp/product/B00...00_i00_detailsThe cut off wheels through tons of sparks and smell and wear down, so I was hoping to find a nice quality metal cutting wheel that's not a cut off wheel.I saw makita has a nice saw that comes with a metal wheel but it was like 2x the price. I don't mind paying good money for a good blade, I just don't know what to get. I will be cutting mild square tubing (1", like .1" wall) for a project now, but I would like flexibility.Thanks,Jon
Reply:The more expensive saw runs at a much lower rpm and is designed specifically for the carbide metal blades. You cannot put the metal blade on the abrasive saw. If you put the metal blade on your abrasive saw it would wear/shear the teeth off in a hurry. Can you take the abrasive saw back and trade up to the better saw?http://www.amazon.com/Milwaukee-6190...2052955&sr=1-1Understand that most of the inexpensive dry cut saws are designed to cut mild steel as they are still too fast for harder alloys. The abrasive saw will eventually cut most anything.
Reply:The abrasive saw runs at a no load speed of 3900. The blade saw runs at a speed of 1500. Putting a blade that is not designed for over 1800 rpm could cause catastrophic failure of the blade and possible serious injury. Dont put a blade on the abrasive saw very dangerous.
Reply:Originally Posted by bhardy501The abrasive saw runs at a no load speed of 3900. The blade saw runs at a speed of 1500. Putting a blade that is not designed for over 1800 rpm could cause catastrophic failure of the blade and possible serious injury. Dont put a blade on the abrasive saw very dangerous.
Reply:I'm confused... how can a BAND SAW use an abrasive blade?
Reply:Originally Posted by TIGguyI'm confused... how can a BAND SAW use an abrasive blade?
Reply:Originally Posted by TIGguyI'm confused... how can a BAND SAW use an abrasive blade?
Reply:Just delivered today Evolution Rage 2 dry cut saw Seems to be well constructed comes with a slip on device for holding square tubing, extra brushes, goggles. Didnt cut anything yet, but will post a review when i do. Ebay $309 with free shipping I think it went up in price $314
Reply:the milwaukee 6190 does pretty good. its what i currently use. my vise is worn completely out and it sucks. this is what it use to be able to do.
Reply:Albieyou will be happy with the rage 2. I bought one last year and its great check out this http://weldingweb.com/vbb/showthread.php?t=60147for info about blades and others that have it too.have funTom
Reply:You can't beat the dry saw Much cleaner cuts less mess than abrasive sawJust watch those sharp and hot little shardsBacked my CATMA over your CARMA oops clusmy me What would SATAN do ?? Miller Trailblazer 302 AirPakMiller Digital Elite Optrel Welding HatArcair K4000Suitcase 12RC / 12 VSHypertherm PM-45Rage 3 sawRusty old Truck
Reply:Originally Posted by killdozerd11Just watch those sharp and hot little shards
Reply:Evolution Rage 2 saw works great. will even b better with a steel only blade. Happy so far
Reply:Originally Posted by TIGguyI'm confused... how can a BAND SAW use an abrasive blade? |
|
发表于 2021-8-31 22:19:44