|
|
Has anyone tried a DIY mig conversion on any welder let alone on this lincoln? Lincoln wants way to much in my opinion for their mig conversion kit.heres what im thinkingharbor frieght regulator http://www.harborfreight.com/cpi/cta...emnumber=94841Mcmaster carr solenoid valve http://www.mcmaster.com/#7877k5/=489i5cthe two total $58.48Even after buying some hose, a few plastic fittings, a new nozzle and a spool of wire it shouldnt come anywhere close to the $151 bucks lincoln wants for their kit.
Reply:PM sent.No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:I purchased the mig conversion kit for my weldpak 100 a few yrs back from Home Depot for about $98. I find $151 expensive also.A few of my toys !LinuxMintManjaroMiller Roughneck 2E Lincoln WeldPak 100HTP MTS 160 Chicago Electric 80amp Inverter Victor O/A
Reply:yea that was a few years ago lol. $151 is from lincolns web site. the cheapest i have found is on sale for $120 at a welding supply online store. still I think I can do it for half that. Im gona try anyhow lol
Reply:I have decided to post this question in the gereral section also to see if it gets more of a response. here is the link to that thread so I dont have to keep up 2 threads lolhttp://weldingweb.com/vbb/showthread.php?t=35108 |
|
发表于 2021-8-31 22:19:38