Pipeliner Hood Question

admin

I just got my pipeliner hood and don't really know how to change the lenses and don't want to just to pry it out and break it. So, I figure it is better to ask now than break and ask later.
Reply:Pull up in the center, top and bottom, and slide out from the little humps. The holder will go back to original shape, so just bend it to get it back in. Order extra's, they will break, especially in the cold temps. Oh, and if you are installing new clear cover lens', make sure you remove any plastic protective film, or you won't see a thing. Ask me how I know this!"Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:They can be hard to pull up, but they will snap up."Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:thanks for the help definitely was going to do it wrong
Reply:Buy a bunch of those plastic retainer clips. Or find an old Jackson hood with a steel retainer clip, and grind it down to fit. Attached ImagesDon’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:Any chance you have a link to buy extra retainer clips?Miller Maxstar 200 SDPiperliner #10 Gold
Reply:I will buy some extras right now I'm waiting for my arc one lens to come in.
Reply:I've had my pipeliner for almost a year and never knew you could change the lenses that way.
Reply:Originally Posted by FlashedI've had my pipeliner for almost a year and never knew you could change the lenses that way.