|
|
Miller Syncrowave 250 DX w/TIGRunner--LIKE NEW!!! $2555.55 Firm... Model#: 903765, Ser.#: LC514776. This is a fully functioning TIG welding setup--just add filler and cylinder. Go to www.millerwelds.com and search support and using the above numbers you can download the owner's manuals which will give you a bunch more info or PM me the questions and maybe I can answer them.Includes: TIGRunner running gear/torch cooler, Diamondback #20 style water-cooled TIG torch with 25' cables/hoses, RFCS-14HD heavy-duty 20' foot control, 1/0 workpiece cable and 300A clamp, a few assorted tungstens and cups, all original owner's manuals/instructions and quik chart. I might have some older filler I can give you to practice with (slightly oxidized). We can negotiate on 4 brand new storage tubes and new filler metals of various flavors (SS, 4043, 5356, 70S, SiB). The cord is about 8' of 8-3 rubber-coated cable with a NEMA 6-50 plug on the end. The cylinder is not included nor available.This welder has a whole bunch of features like "fan-on-demand", programable features, etc. Refer to the owner's manual. A pulser (about $160?) was one option I had considered and a sequencer is also available.Will also do stick welding but the stinger is not included. I have a used 300A CoolTong, some 2/0 cable and lugs I could fab a stinger cable for you (at extra cost).This welder has been used about 4 hours by me and that is probably more than the guy I bought it off of who was a Sanford, FL cop that did welding on the side. This thing was/is like new as was most of the other stuff he was selling. He had a TB301G with only three (3) hours on it! I bought this because it was a good deal I missed having a TIG welder around and probably will again once I sell this one. I'm selling it for what I paid for it--no less. A new one will set you back $4000+ so this is a very fair deal. There are some minor scuffs/scratches on the top that would probably buff out and a ding here and there (you'd have to look hard!). This has been inside all of its life. You are welcome to try it out when you come here to pick it up.The only "problem" I've had with this is that the globe on the factory flowgauge started leaking at the seam (replaced with new Holox similar replacement) and the torch/cooler needed bleeding because the welder had sat for a while (indoors). The 3-year warranty has also expired. I think the transformer might be covered for 5 years.The reason I'm selling is that it is violating my policy on usage (hasn't been used in a month or more) and I'm tired of pushing it out of my way. Plans for a shop are on hold for now and I know as soon as I sell this I'll want another. I really don't have the time to practice or a dedicated spot for it to live so it has to go. I find it is easier to just grab the spoolgun on the MM210...I do not have the time or ability to crate this. Or arrange shipping. If you want to drive over or send a truck with a tailgate it can be shipped and I'l be happy to cooperate with any shipping companies. If you bring a pickup and a cherry picker that would work, too!When you come to pick it up you might consider these other items for sale that I really don't want to have to package for shipping: slightly used Milwaukee 14" chopsaw with a blade or three--$125, Campbell-Hausfeld contractor Honda gas-powered air compressor--missing wheel but works fine!--$300, New Prince XL Spoolgun with leather cover and 25' leads/hoses--$700. These also violate the usage policy! Thanks for looking! Bob. Attached ImagesMM252 w/30AMM140 w/o AS w/SM100 w/CO2TA ArcMaster 185 TIG/StickTA 85 TIG/Stick LunchboxHobart (Miller) AirForce 625Hobart AirForce 250ciVictor O/A (bored)Lincoln Patriot AutoShade (freebie)45ACP for those stubborn jobs...
Reply:I have been looking for a good used syncro. Where are you located at? It might be worth the drive. Jacob
Reply:maybe 4 years ago |
|
发表于 2021-8-31 22:17:18