I have about 2ft angle 2ft round stock about 3 ft of flat stock and a few lawn mower blades.Any ideas of stuff I could make and test abilitys with these parts? 110v mig welderLast edited by 1AgKid; 02-02-2016 at 08:50 PM.
Reply:What are the dimensions ? Angle could be 6x6x1/2 and 6" round solid.
Reply:1 inch from the front of the angle to the angle and 1/4 round solid
Reply:If you design it right you could get some casters and make a wheelie cart or shelf for the welder
发表于 2021-8-31 22:16:39