50' long Push pull gun

admin

Has anyone ever used or seen  used a aluminium push pull system at work.....Thanks! I have a 25' one but could use longer one.....                   Thanks for reading               GH
Reply:Keep it straight as possible, and don't use wire smaller then 3/64".....My uncle has a XMT450mpa and XR- Aluma feeder with 50' push pull gun.That's the info he passed along to me.What machine do you have?Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:We have a 25' cobramatic. 50' would be nuts.
Reply:I have a Lincoln 350mp and a python 25'  works fine after a few issues when new...Had a miller 30A before  with a 250x millermatic.But got a few jobs 25 feet up from the ground.                                                                        GH
Reply:7A749  I think  that's the best bet....thanks for the reply!                                                                  GH