3 wheeled dolly for idealarc

admin

I have an older tombstone Idealarc 250 and I am looking for some pics or a sketch-up of the original factory 3 wheeled cart with the steel wheels that these came supplied with. I am interested in building one similar  OR an original to buy would be great. The Idealarc that I'm working on is sort of a restoration project.Thanks.
Reply:The bottom of your idealarc has two slots for a back axle, while the front is just a single wheel with handle. Just find you some old solid steel wheels and google some images of original ones and go with it. Im just about to build one for the ac buzz box at the shop because im getting tired of having to move it around. Its a pain to move so I cant imagine how hard it would be to move an older style tombstone by hand. Probably a good way to end up at the hospital My vintage equipment 1957 Lincoln sa 2001980's Lincoln 225 AC1952 F-2 ford truck1957 F-250 ford truck
Reply:Anything here catch your fancy?How about Freds two wheeler.Felon Attached ImagesLast edited by Felonyass Monk; 09-14-2009 at 08:49 PM.Caution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:I love that bicycle made of wood!MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:Desert rider said "I love that bicycle made of wood!  "Heres one you might like  of Freds kinfolk racing down a mountain.Wonder what they used to weld those frames upFelon Attached ImagesCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:wild horses_323 where are you from?? I know that Stumpf Welding Supplies out of Mascoutah has many carts and quite a few of them are factory. I would check with them if you are close, or don't mind paying shipping for one.  www.stumpfweldingsupplies.com
Reply:I'm located in E. Washington state near Spokane. Clever cart(s) especially the wooden one.I realize the are quite a ways away, but I'll check with Stumpf. Thanks for the responsesDwain
Reply:Cool Deal on restoring your LE Idealarc 250! I would like to respray my 250.I have an older Idealarc that I would like to find an original stand for also. If you find one, please post a pic on this thread. Thanks,John
Reply:I'm pretty sure that Stumpf carries the remade nameplates for those machines also. I bought a refurbished Idealarc 250 from them and it had a brand new ac, dc-, and dc+ nameplate and also the current nameplate where the pointer slides through.
Reply:www.decalshoppe.com carries the stickers and faceplate also.Good people to deal withFelonCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:I'd like to find a factory three wheel cart too...
Reply:I actually found a factory 3 wheeled cart a few months ago for a good price. It just happened that a 250 AC/DC was attached. The cart was in good shape except for a cracked weld at the front wheel pivot point on the frame. Nasty white peeling paint job disappeared with a sandblaster and wire wheel.I'll post some pics. I'm also needing a drawing for a final project for an AutoCAD class I'm taking, Maybe I'll do it.Now I just have to figure out what to do with the extra welder. It would make a good resto project I think.
Reply:finally found a factory 3 wheel dolly... only problem it was attached to an Idealarc 400 with wire feed. wanted it really bad, so I purchase the 400 amp mig welder. now I've got to sell the Lincoln 400 amp Mig .... without the 3 wheel dolly of course
Reply:Here is a couple pics I took of a machine that is sitting in Stumpf's warehouse
Reply:sweet !!!! that looks awsome.i want to restore mine to look as good as that