WTB: Miller Syncrowave 200 Cover & Coolmate

admin

I'm looking for the following:Cover for my Miller syncrowave 200110/115v Miller CoolmateThanks for your time,DKEFI Tuning SolutionsDyno Tuning and Race Fabricationhttp://www.dkgoodrich.comMiller Syncrowave 200Miller Coolmate 3Miller EconoTIGMiller MIGWeldcraft WP20, 25ft braided rubber, #12 gas lens
Reply:I would also be interested in a finger control add on for my tig torch. Thanks!EFI Tuning SolutionsDyno Tuning and Race Fabricationhttp://www.dkgoodrich.comMiller Syncrowave 200Miller Coolmate 3Miller EconoTIGMiller MIGWeldcraft WP20, 25ft braided rubber, #12 gas lens
Reply:Too bad our paths did not cross sooner?Check out my post at the top of this thread.AWS certified welding inspectorAWS certified welder
Reply:Its all good man,Purchased the cover new,Looking at a couple different coolmatesThanks for your time.DKEFI Tuning SolutionsDyno Tuning and Race Fabricationhttp://www.dkgoodrich.comMiller Syncrowave 200Miller Coolmate 3Miller EconoTIGMiller MIGWeldcraft WP20, 25ft braided rubber, #12 gas lens
Reply:Originally Posted by dkGoodrich.comIts all good man,Purchased the cover new,Looking at a couple different coolmatesThanks for your time.DK
Reply:Sorry I ended up purchasing a coolmate 3, new cover and a braided rubber wp20EFI Tuning SolutionsDyno Tuning and Race Fabricationhttp://www.dkgoodrich.comMiller Syncrowave 200Miller Coolmate 3Miller EconoTIGMiller MIGWeldcraft WP20, 25ft braided rubber, #12 gas lens