|
|
Miller Air Pak for sale that welds fine but the air portion is not operable. 4300 hours on it. Located in ND and could help with shipping or possible meet halfway within reason. 3000 obo. Bought it knowing the air did not work and when I took it apart it is missing pieces in the head. Will post picture this weekend. If anyone knows or has an air cylinder head for one I would be interested in the parts.
Reply:do u have any pics of the manchine?
Reply:I will take some pictures tomorrow morning and get them put on.
Reply:subscribed, somewhat interested.thermal arc mst400, va4000 feeder, lincoln 175 min, victor torches, miller s32p feeder, air arc k4000 for work.
Reply:I got sent out of town for 2 weeks due to work and did not get the picture taken. I will be back on the 4th of February and will post a picture then. I apologize for the delay.
Reply:Well I am back home and have taken pictures. Today I also started it, ran the 110 power, and welded with it. It idled up and down with the grinder and also with the welder except for once when I struck an arc it did not. I then idled it up and down and tried it again and it worked. Accepting offers and willing to work with someone to possibly meet. Attached Images
Reply:Lowering to 2200
Reply:Do you have any pictures of what is missing off the motor for the compressor? Or do you also know exactly what is missing from the compressor? So what your saying is the idle is not working quite right either?
Reply:Originally Posted by SkeptixDo you have any pictures of what is missing off the motor for the compressor? Or do you also know exactly what is missing from the compressor? So what your saying is the idle is not working quite right either?
Reply:I'm going to send you my phone # in a PM to ask some more questions.Thanks,Colby |
|
发表于 2021-8-31 22:10:28