Think this could be welded?

admin

Second time in about a month. Think it can be welded? If I had a 110 mig I could be goin in no time.The  "bad guy". Yeah, I know, but it'll be ok!Lincoln Square wave 255Miller Vintage mig30a spoolgunThermal Dynamics Pacmaster 100xl plasmaSmith mc torchEllis 1600 band saw
Reply:The Driver's Mirror looks OKAY!Everlast PowerPro 256, Everlast W300 Cooler, Everlast Cart 250Millermatic 211, Spoolgun 100, Miller HD CartJackson W60 Truesight Digital Auto Darkening, Victor 315 Torch sitting on a Harper 830-86 cart
Reply:Let me guess, hooked a short bollard while backing into a slot and had the truck cut hard and watching the mirror instead of his front end.
Reply:Originally Posted by ironmangqLet me guess, hooked a short bollard while backing into a slot and had the truck cut hard and watching the mirror instead of his front end.
Reply:Sure, you just fiberglass rods HF 98233 Stick/TigHF  95136 PlasmaEastwood TIG200Eastwood MIG250Damn, I cut it twice already and it's still too short!
Reply:Of all the things I lost I miss my mind the most...I know just enough about everything to be dangerous......You cant cure stupid..only kill it...
Reply:throw that away and weld something up out of 6" channel..
Reply:Originally Posted by welderjNo, I was at the fuel island, when I came out from paying it was already done. Atnleast he didn't try to run off.
Reply:Originally Posted by FORTEALLOYI'd call him the guilty party, but not the bad guy. Bad guys drive off, as you found out all too recently. Anyone accepting responsibility for their actions has a measure of integrity. But I do think Murphys Law has dialed in on your rig.
Reply:Yeah replace it with some channel, make it so the next guy will really feel it hahahaMiller Spoolmate 200 w/t S-52 WirefeederMM 211'09 Miller Trailblazer 302
Reply:Originally Posted by Grandslam99The Driver's Mirror looks OKAY!
Reply:Na, that should buff out fine. No need to weld.
Reply:Here ya go...Regards,RobGreat Basin WeldingInstagramBlue weldersRed weldersMy luscious Table DIY TIG Torch cooler
Reply:The rectal uni...I mean rental unit. Great deal from Dart on this. I can buy my insurance anywhere I want, but Darts is cheapest so that's what I use. Their deal is if I use their preferred repair shop they pay my $1000.00 deductible and rent me this truck for $25.00/day. They also suspend my insurance and other fixed costs on my truck til it's repaired which saves me $35.00/day. So I actually will make $10.00/day and loose no time. This is why I stay at Dart. My truck should be done by next Friday.Yeah, I know, but it'll be ok!Lincoln Square wave 255Miller Vintage mig30a spoolgunThermal Dynamics Pacmaster 100xl plasmaSmith mc torchEllis 1600 band saw