A Few Projects

admin

A vehicle height check thing, not sure of the proper name.....An all SS custom BBQ/Smoker...Custom bumper/brush guard/winch mount... Attached ImagesMiller TrailBlazer 251Miller HF-250-1Miller MaxStar 150 STLHyperTherm PowerMax 380 plasmaLincoln PowerMig 180Millermatic 252Miller Diversion 180
Reply:Nice work and a  A+ for the door handle on bbq/smoker
Reply:Love the BBQ!Can you tell me a little about the muffler added to your machine? I have a bobcat 250 I am considering doing the same to. It is waaaaay too loud. Did that muffler quiet it down quite a bit?
Reply:They all look good.*************************************Mike AccardiHenderson, [email protected] 250XLincoln Weldpack HDMiller Syncrowave 180 SD*************************************
Reply:Thats what I call a bumper. Bring on the deer...    Miller 211Hypertherm PM 451961 Lincoln Idealarc 250HTP 221  True Wisdom only comes from Pain.
Reply:I contacted Cummings, the now maker of Onan engines to inquire about muffling the Trailblazer and was told that any after market muffler would not damage the engine. I bought the muffler at a local parts store for $25.00. It does quite the machine some, mainly when idling.Miller TrailBlazer 251Miller HF-250-1Miller MaxStar 150 STLHyperTherm PowerMax 380 plasmaLincoln PowerMig 180Millermatic 252Miller Diversion 180
Reply:on a set of drawings i got a while back it was called an "over height annunciator"  when i talked to the architect he said what better way to announce you were over height than a massive clank and bang followed by a gong.Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.