Tig Brazing Question

admin

I would like to try some tig brazing. I have seen this brazing rod at the local TSC.http://www.tractorsupply.com/en/stor...in?cm_vc=IOPDPThis is Hobart #770510Is this suitable for tig brazing or should I try something  else.Hobart Beta-Mig 250T-D Cutmaster 81Miller Maxstar 150STLMiller T-Bolt 225 ACChicago Electric Mig 151Hobart RC-256 Haas-Kamp Conversion(sold)
Reply:That is low fuming gas rod. Standard silicon bronze (old name Everdure) works fantastically.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Ok, so you're saying that rod is for torch use and not tig?Hobart Beta-Mig 250T-D Cutmaster 81Miller Maxstar 150STLMiller T-Bolt 225 ACChicago Electric Mig 151Hobart RC-256 Haas-Kamp Conversion(sold)
Reply:Yes, the Silicon Bronze comes in 36" lengths for tig. Flows like butter on DC, but can be used on AC current as well. Very good for welding bronze to bronze, bronze to brass, bronze to steel or stainless steel, and steel to steel, steel to stainless, and stainless to stainless.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Thanks, thats the info I was looking for.Hobart Beta-Mig 250T-D Cutmaster 81Miller Maxstar 150STLMiller T-Bolt 225 ACChicago Electric Mig 151Hobart RC-256 Haas-Kamp Conversion(sold)