|
|
Hello everyone our boss dropped this welder of to us wondering if any one had a picture or a wiring schematic of where the wires go from the contactor it was replaced and no one seems to no where the wires go we tried snap on and Systematics with no luck
Reply:Well, here's the owners manual with a parts list, troubleshooting and calibration guides.http://www.800abcweld.com/pdf/fm140a_owners_manual.pdfand the service manual:http://www.800abcweld.com/pdf/fm140a_service_manual.pdfLast edited by mike837go; 05-20-2016 at 04:14 PM.Be wary of The Numbers: Figures don't lie,. but liars can figure.Welders:2008 Lincoln 140 GMAW&FCAW2012 HF 165 'toy' GTAW&SMAW1970's Cobbled together O/A
Reply:ty mike i found the manual as well need to know where the 6 wires going to and from the contactor go since there all black in color
Reply:Have you taken all the covers off? My old 212 has a schematic inside one panel but it's the one you have to take screws out of and remove to see it. |
|
发表于 2021-8-31 22:06:17