First Al welds on new Dynasty 200dx
Tue, 31 Aug 2021 15:04:27 GMT
My first welds with my dynastyCk17 aircooled torch 3/32 1.5 lanthanated25cfh argonNo pulse1/4" al plate3/32" 5356 filler ( i think)Top and 2nd weld 120hz3rd 200hz4th 200hz and a back and forth actionJust kinda playin around. Im entirely self taught and could use some critique.Thanks for looking
Reply:120 htz. is what I like. The first two welds looks great. 25cfh is more than I like to use, but again the welds look great. Filler looks like 4043 to me. Bend it and see if it creates a sharp corner. If so it is 4043. 5356 strengthens and creates a large radius.I kept all my default setting except pulled DCEP to 3/4 of DCEN. Been there for 2 years now. I set my CFH to 12 on a #6 cup. Have fun.Last edited by shovelon; 09-23-2012 at 01:14 AM.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:And it could easily be 4043. I have both, but didnt think to check until I torched both ends off.Im sure having fun with this machine though. So many variables gets confusing. I think I should stick with the basics and practice butts, laps and fillets for a while under default settings like you say.
Reply:Those look great. Reduce your flow to 12-15 cfh. Looks like too much EP to me secondary to the large frosty cleaning band around the beads. What was your balance set at?I had a D200 and found that the advance functions were way too much for me. I will never achieve the skill needed to make those necessary. The 4 different AC waveforms were cool, but I never used anything but the SSQ. I also never welded at more than 150 Hz. I didn't find it to actually focus the arc that much better for me at that point. I actually prefer 60, but that prolly cause I learned on a Syncro. It definitely had better arc starts at low amps than my current machine, but I couldn't pass on the deal I got on my TA300.Oh, and seriously consider upgrading to a WC 20 series torch. They are so much more maneuverable than the 17.Last edited by Drf255; 09-23-2012 at 07:06 AM.TA Arcmaster 300CM3XMT 304S22P12 suitcase feederX-Treme 12VSOptima pulserTA161SMaxstar 150STLHypertherm PM45OP setupStihl 020AVP, 039, 066 Magnum
Reply:I think the balance was at 70 or 75. I never had the option on my old econotig. The high hz thing is so strange to me. When i adjusted back to 60hz it sounded so familiar but cleaning action better. I will just have to play with the balance more to get dialed.I am really liking the lanthenated tungsten at 1.5%. Is 2% much different?Also is the WC 20 torch a weldcraft? My lws let me trade out the kit torch to the ck17 with superflex hose. That hose is crazy flexible and doesnt torque your torch around like the stocker.
Reply:Originally Posted by DirtyOzI think the balance was at 70 or 75. I never had the option on my old econotig. The high hz thing is so strange to me. When i adjusted back to 60hz it sounded so familiar but cleaning action better. I will just have to play with the balance more to get dialed.I am really liking the lanthenated tungsten at 1.5%. Is 2% much different?Also is the WC 20 torch a weldcraft? My lws let me trade out the kit torch to the ck17 with superflex hose. That hose is crazy flexible and doesnt torque your torch around like the stocker.
Spot Welder for
First Al welds on new Dynasty 200dx,Spot Welding Machine for
First Al welds on new Dynasty 200dx, Laser Welder for
First Al welds on new Dynasty 200dx, Laser Welding Machine for
First Al welds on new Dynasty 200dx,Spot Welder manufacturer in China,
First Al welds on new Dynasty 200dx Laser Welder manufacturer from China
go to see
Welding Machine for First Al welds on new Dynasty 200dx
