PDKJ,born for metal welding

Accumulated services for 5000 + enterprises
65000 + welding workpiece cases
Senior R & D and rapid service team
three day rapid process samples
national high tech enterprises
15 years of focus on welding field

The best quality The best price

China Compulsory Certification(3C)
CE export certification
100% qualified inspection
three years warranty of main frame
77 patented inventions
ISO9001 international quality system certification

Welding Issues,Just PDKJ

Spot welding, projection welding, seam welding, touch welding
T joint, lap joint, corner joint,butt joint, edge joint
7*24 Online service
15 minutes quick response
detailed operation instruction and video
Perfect pre-sale, in sale and after-sale service

Spot Welding Machine for TWO XMT-304CC Kentucky

Spot Welding Machine for TWO XMT-304CC Kentucky

Welding Automation for TWO XMT-304CC Kentucky

laser Welding Machine for TWO XMT-304CC Kentucky

Welding Automation for TWO XMT-304CC Kentucky

Welding Automation for TWO XMT-304CC Kentucky

Platform Spot Welding Machine for TWO XMT-304CC Kentucky

Platform Spot Welding Machine for TWO XMT-304CC Kentucky

TWO XMT-304CC Kentucky


Tue, 31 Aug 2021 14:24:49 GMT
I have two of these machines, one works great, one doesn't.  I did quite a bit of troubleshooting on the non working machine and it looks like its the control board, which I found NOS from a member on here (I will pass on the information to anyone that buys it)SO if you want a good one and spare parts, this is a deal for you!The working one $1300 unit only no accesories, the one that needs a $200 board $700.  You can have two working machines for less than half of a new one that is $4300.  I am in lexington Ky, your welcome to come try before you buy. I can supply a ground lead, but prefer you bring your own torch (mines new and pretty don't want someone messing it up)I am open to some offers for each or both.Brandon eight five niner 361 fourten seventy six  (spelling errors intended)or brandon at svtparts dotty com
Reply:Thats no way to score brownie points with the welding web folks...you are supposed to sell it cheaper on the welding forum then CLhttp://lexington.craigslist.org/tls/2242994514.html
Reply:Originally Posted by AMC724Thats no way to score brownie points with the welding web folks...you are supposed to sell it cheaper on the welding forum then CLhttp://lexington.craigslist.org/tls/2242994514.html
Reply:Yep.  "Savvy", AND we watch Craigslist like vultures following a wagon train in Death Valley.
Reply:These are best offer, I actually had it cheaper here, then dropped the price on CL, and forgot to drop it here as well.As far as "too much" these are selling on ebay for 7-800 non functioning and 1300-1500 working.  Thats where I based my prices on.  I just hate losing $50 to ebay on each one, and paypal fees.  The "non working unit" I troubeshooted and took good parts and swapped in, and its the control board, cruizer on here was willing to sell me a NOS board for $200. Aside from some crazy larry craigslist deals these are the going prices.If someone was to shoot me a REASONABLE offer they just might get a heck of a deal.  Brandon
Reply:FYI to your comments about miller not making this unit for awhile, these are 2004 Model year units.  Hasn't been that long, they sold the CC/CV and the CC at the same time, much like they do the dynasty SD and DX.
Reply:One last thing, I may take a plasma cutter in tradeThanks guys
Reply:Crazyone,Please send me some of the stuff you're smoking.Let me know what the shipping charges are.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:'if your not interested, why do u waste your time in this thread?  fyi, i already got a couple calls and messages at this price so I guess im not too far off on pricing
Reply:I am not out to gouge anyone, thats why they are obo, If they dont sell ill just keep them, they compliment my dynasty very well.Thanks for the post, I have no problem with constructive posts, just the  "me to" posts that pose no value. The few sites i help run have a zero tolerance for thread crapping
Reply:Steve (7A749) can certainly defend himself but his post did have value in that he suggested "Ebay is the BEST indicator for pricing used equipment!!" and if anyone should know that it's him.  Just because he got a laugh out of SundownIII's post () in the process doesn't make it thread crapping.  Not here anyway. MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Crazyone,I was in yacht sales/service for nearly 20 years.I can't tell you how many owners have commented, "this isn't working but IT'S A CHEAP FIX".You know what the buyers had to say, "IF IT'S SO DAMN CHEAP TO FIX, HOW COME HE DIDN'T FIX IT".Good luck on finding a buyer.  You'll probably do better on e-bay.  Lot of bidders there don't have a clue what they're bidding on.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:Crazyone,Just had to ask.Do you really think that the posters on this board are stupid?Do you really think that this is the only board where we're members?Are these the same two (2) XMT 304's (CC Only) that you PAID $600 FOR BOTH?The same broken machine where you have two pages of questions trying to repair the machines and still haven't succeeded?  Easy fix my azz.If anyone questions where I'm coming from, go to millerwelds.com and click on the community tab.  Go to crazyone and read his posts.BUSTED!!!Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:Originally Posted by SundownIIICrazyone,Just had to ask.Do you really think that the posters on this board are stupid?Do you really think that this is the only board where we're members?Are these the same two (2) XMT 304's (CC Only) that you PAID $600 FOR BOTH?The same broken machine where you have two pages of questions trying to repair the machines and still haven't succeeded?  Easy fix my azz.If anyone questions where I'm coming from, go to millerwelds.com and click on the community tab.  Go to crazyone and read his posts.BUSTED!!!
Reply:prolly a different crazyone who bought 2 of the same machines crazyone    * View Profile    * View Forum Posts    * Private Messagecrazyone is offline Junior MemberJoin Date    Feb 2011Posts    29Default Should I? buy XMT-304    I found two XMT-304 cc (not cc/cv) for $600, one works, one does not, it powers up but doesn't weld.    Just curious to what you all think? It doesn't have any leads, tig torches ect. But from what I can tell its a very good deal?    Thanks    B http://www.millerwelds.com/resources...-I-buy-XMT-304Last edited by SEAR; 03-06-2011 at 05:19 PM.
Reply:Here here I with what he said if some one helps you out of the goodness of there heart don't try to bend them over!!!!Sport
Reply:Wonder how many posters will be inclined to step forward and help Crazyone try to repair his next machine?Remember the old saying:You can fool some of the people all the time.You can fool all the people some of the time.But, you're not going to fool all the people all the time.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
Reply:Well I knew was right Steve - you can certainly defend yourself! Being in the business you are for as long as you have and the upstanding guy I know you are I can understand how this subject can get under your skin real quick.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Yes I got a good deal on them, does that mean I have to resell them for what I paid for them? No.  I spent alot of time trying to figure out what was wrong with the bad machine, and did just that.  I swapped in boards from one machine to the other till I found the problem (after some initial diagnoses with a meter and main components)Turned out one bad sheild wire see in that post has got broken, and my guess touched something it shouldn't have.  I swapped in my control board and it looks like everything was good and also tig'ed just fine.  In that thread, you can at least see that I did quite a bit of troubleshooting on the bad machine.  I had to drive a 3.5 (each way) hours to pick these up, and took a risk as I had no idea if they worked or not, thats why they were cheap.  After getting them home, I cleaned them up , and got lucky one of them worked.  I don't really  feel like I need to justify charging more than I paid, I know even those that are bashing me on this thread would never sell them for what I paid either.  I am just trying to offset the cost of the dynasty 200 I bought, but after playing with the XMT's again last night I think I am going to keep the good machine, it makes short work of 1/4 inch steel.  I am not sure why reselling something is a bad thing, do you bash walmart for buying stuff crazy cheap then marking it up and reselling it to you?  How about your water gas company?  Your local LWS doesn't pay anywhere near what you are paying, do you also go in there and bash them?  If you can't buy it cheaper anywhere else, its still a good deal....I came to this board to learn about welding aluminum (main reason I bought the new welder, it wasn't because the xmt was a POS, it just didn't do alum) and really I have to say its less than inviting.  People have spent more time trolling around in my threads everywhere, than being helpful.  If you don't want to buy it fine, if you think it too much fine, I don't care, just don't thread crap and thats absolutely what most of you are doing.  If everyone knows how overpriced I am (supposedly) then they can just not buy it.
Reply:A few more things,My intention when I was repairing the bad machine was never to resell and make a profit, my father and I bought these machines with the hope we could fix them and each have one at a reasonable price.  Along the way I found out (shortly after I bought them) that they didn't do aluminum, and outfitting them with a mig or spool gun setup was just very expensive to do.I am not in the "resell business", there were some really nice people that tried to help figure out my other machine so I could give it to my dad, .  Their intentions were good, and it is VERY hard to diagnose problems via the internet.  Lucky I did the footwork and figured it out.  I just am running out of money, which is why I am trying to sell the XMT's, and haven't replaced the board yet.  I would be MORE than happy to a potential buyer to put my good control board in the other machine to prove thats what it is.   I ended up buying a brand new dynasty 200 so I could do aluminum work on my fathers boat that my grandfather left him, and my tailgate bus.  People are making me out to be some bad person here and it really does piss me off.  Anyways Brandon
Reply:Crazyone,Here's where the whole thing "blew up".First off, I personally wouldn't touch a machine that some "non-qualified tech" has been into, swapping parts willy nilly until the machine 'lit up".  After reading what you've done with your "working machine", I wouldn't touch it with a 10' pole.Had you done just a "little homework" you would have KNOWN that the XMT304 was never designed for tigging aluminum.Your last post just reinforces what many of us already knew.  The XMT304 (CC only) is not going to get it done with a spoolgun, not because a spoolgun costs too much.  It's because the CC version of the XMT was NEVER DESIGNED as a mig capable machine.  It lacks a CV capability.As 7A749 has already pointed out, perception is everything.Even in the beginning of this thread, when people who buy and sell equipment all the time, told you you were asking too much, you wanted to argue and tell them they didn't know what they were talking about.  Pretty arrogant if you ask me.Good luck on selling them on ebay.  Maybe you'll find a sucker.Don't think anyone on here is going to take the bait you're trolling.Syncro 250 DX Dynasty 200 DXMM 251 w/30A SG XMT 304 w/714 Feeder & Optima PulserHH187Dialarc 250 AC/DCHypertherm PM 1250Smith, Harris, Victor O/ASmith and Thermco Gas MixersAccess to a full fab shop with CNC Plasma, Water Jet, etc.
ReplyTWO XMT-304CC Kentuckyn the lighter side of things...i read to quotable quotes in all this
Reply:Well sundown, I did do home work, and if you read the website on miller, it shows it does aluminum.  It doesn't specify that it would be via spool gun, it has a nice blue dot saying "designed for" right on the feature matrix on the site, so mr. "i'd go research it"  What the hell was I supposed to take from MIllers own site about the units?  I relieze that mine is a CC only version, but thats  a quick display board change to make it a cc/cv, which nets alum welding, just not tig aluminum welding...I didn't just swap parts in, I did test a variety of things before swapping boards, I got a copy of the test points inside my xmt, and via that and the combination of swapping parts figured out where the problem existed, plus checking a variety of things on the good one to get a direction of what going on.  If I had taken it to a shop they would have put brand new boards in no doubt, and would have ended up replacing the display board which was not bad, the igbts which were not bad, then finally getting to the control board.  You continually post  in this thread and have 0 intention of buying it.  I have made no ill remarks torwards you, would you like it if someone just started jumping on you for no reason?  Maybe someone should just follow all your threads and be a dick to you ...Last edited by Crazyone; 03-07-2011 at 09:09 PM.
Reply:Originally Posted by CrazyoneWell sundown, I did do home work, and if you read the website on miller, it shows it does aluminum.  It doesn't specify that it would be via spool gun, it has a nice blue dot saying "designed for" right on the feature matrix on the site, so mr. "i'd go research it"  What the hell was I supposed to take from MIllers own site about the units?  I didn't just swap parts in, I did test a variety of things before swapping boards, I got a copy of the test points inside my xmt, and via that and the combination of swapping parts figured out where the problem existed, plus checking a variety of things on the good one to get a direction of what going on.  If I had taken it to a shop they would have put brand new boards in no doubt, and would have ended up replacing the display board which was not bad, the igbts which were not bad, then finally getting to the control board.  You continually post  in this thread and have 0 intention of buying it.  I have made no ill remarks torwards you, would you like it if someone just started jumping on you for no reason?  Maybe someone should just follow all your threads and be a dick to you ...
Reply:Also Sundown, I decided to look through your posts, it looks like you rarely have a postive or meaning full post, so I am just going to ignore your posts and you.   There seems to be quite a few good people on here, your just not one of them. But before I do this is my last comments to you.  There were some incorrect statments made about mine being way old, I stated they were 2004 models and that miller manufactured the CC/CV and the CC model at the same time, and talking to miller they did this till about 2006.  As far as my prices, I never argued about prices, I simply stated that I looked to ebay to set my prices.  I felt it was a good place to get a good idea what the used price was worth.  I buy a ton of stuff on ebay, and sell a little here and there, and to my knowledge there isn't a blue book for used welders that free and available for me to look at.  I did however forget to reduce my price on here, when I did on craigslist, but this forum doesn't allow me to edit my first post of a topic.  Soco,CC/CV also a DC only machine,  and you can convert a CC to CV for about 480$ just by changing the display board and decals on the front of the unit.  The only way to do aluminum with the xmt is with a spool gun, or feeder with aluminum.  Now there have been posts of people doing it, but the quality or welds and having to use straight helium and still have so so welds just isn;t worth it.BrandonLast edited by Crazyone; 03-07-2011 at 09:15 PM.

Spot Welder for TWO XMT-304CC Kentucky,Spot Welding Machine for TWO XMT-304CC Kentucky, Laser Welder for TWO XMT-304CC Kentucky, Laser Welding Machine for TWO XMT-304CC Kentucky,Spot Welder manufacturer in China, TWO XMT-304CC Kentucky Laser Welder manufacturer from China
go to see Welding Machine for TWO XMT-304CC Kentucky

Products