Looking at a Miller Invision

Tue, 31 Aug 2021 10:17:31 GMT

go to see Welding Machine for Looking at a Miller Invision

I am looking at a Miller invision power source. Don;t know nothing about these. What do i need to know. Will my suit case work with this welder? The guys only wants 800 for it.
Reply:most important thing is power requirements. is it three phase, and do you have three phase?Dynasty 200DXPassport plus w/ spoolmate 100victor 315c oxy/(act and prop)Miller digital elitemilwaukee power tools
Reply:Yah we have 3 phase in the shop
Reply:What suitcase? I don't see a provision for running a VS type suitcase from this but I could be wrong. Looks like one of the RC type suitcases would work no problem however since it's just a standard feeder in a heavy duty case..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:a 14 pin rc suitcase. Thinking its an older machine. Do all these machines have a 14 pin connector
Reply:The Invision 304P and the Invision 350MPa manuals I pulled up both showed the 14 pin connection. I think these are the oldest of the units from the numbering system. If you can get the exact model you can pull up Millers manual on it and find out for sure.I was looking to see if they had a setting like the XMT's for a VS feeder, but only saw the 14 pin connectors . Since it is designed as a shop mig, I'd be surprised if it didn't have a 14 pin connector since that's Millers standard for their shop feeders..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Well i bought this machine. I noticed it has a 19 pin connector. What is the difference between the 14 and 19. My RC suitcase is a 14. Will tha fit the 19??
Reply:The other thing is that i didn't get a Setup Pendant for the machine. Am i going to need this for the machine to work? It doesn't say anything in the manual that you have to have one, but how do you change the setting for this machine if i don't have the Pendant. Does anyone know anything abou this machine??

Spot Welder for Looking at a Miller Invision,Spot Welding Machine for Looking at a Miller Invision, Laser Welder for Looking at a Miller Invision, Laser Welding Machine for Looking at a Miller Invision,Spot Welder manufacturer in China, Looking at a Miller Invision Laser Welder manufacturer from China
go to see Welding Machine for Looking at a Miller Invision