Finally building a gantry crane for a buddy pretty excited about it just wondering if anyone has any pointers kinda straight forward but just wondering if theres something extremely good to do and extremely not good to do lol heres a video of the build so far AHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Reply:I usually build them like an inverted T either with or w/o diagonal braces, depending on the size and strength of the uprights. I usually cap the ends of the crawl (I) beam to prevent twisting. Lots of examples you can look at, some are better than others.If you are going for minimal structure and max loads, look at a commercial gantry which has been properly engineered."The reason we are here is that we are not all there"SA 200Idealarc TM 300 300MM 200MM 25130a SpoolgunPrecision Tig 375Invertec V350 ProSC-32 CS 12 Wire FeederOxweld/Purox O/AArcAirHypertherm Powermax 85LN25
Reply:copy that thank you for all the input!!! ill make sure to post the finished product should be done pretty soonAHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Reply:Maybe check out Wallace Gantry for ideas too. http://www.gantrycrane-outlet.com/?g...FZRlfgod2H0DsQ
Reply:Good link lots of info thanksAHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Reply
art 2 is now up and part 3 will be out as soon as it gets picked up!!! let me know whatcha guys think... the good the bad in the middle hahahah AHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Reply:liking the build so far. maybe I missed it but are the casters of the locking type? ya know to prevent unwanted rolling. on a side note, an old gantry (like 1940's) that a buddy uses has supports 1/4"x2" running from the top beam to the outer ends of the legs. - think large triangle from beam>base>caster. however, your gussets at the base will probably work just as well, if not better.
Reply:Greatly appreciated man! And the casters arnt locking probably going to really annoying to use at times hahaha a lock would of been a good investment but thats the caster my customer wanted and gave me.... so i guess we shall see when he sends me a video in use!!! which is hopefully soonAHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Reply:Gussets, like yours, seldom need full length welds. Not that it's a bad thing, it just adds a lot of heat which is more to deal with when straightening. The assembly is fairly well balanced so I'd imagine distortion wasn't too bad."Any day above ground is a good day"http://www.farmersamm.com/
Reply:surprisingly it didnt warp at all everything straight nice and straightAHP alpha mig 250 AHP alpha tig 200xCheck out my YouTube channel https://www.youtube.com/channel/UCqp...k-wpqmUyGs_i_w
Spot Welder for
Building a gantry crane! any ideas or tips?,Spot Welding Machine for
Building a gantry crane! any ideas or tips?, Laser Welder for
Building a gantry crane! any ideas or tips?, Laser Welding Machine for
Building a gantry crane! any ideas or tips?,Spot Welder manufacturer in China,
Building a gantry crane! any ideas or tips? Laser Welder manufacturer from China
go to see
Welding Machine for Building a gantry crane! any ideas or tips?