Miller Spectrum 875 Kerf width

Tue, 31 Aug 2021 09:45:52 GMT

go to see Welding Machine for Miller Spectrum 875 Kerf width

I have a Miller Spectrum 875 and I am trying to find out some specs of the Kerf width with the 40 amp and 60 amp tips and some cutting speeds IPM to plug into Sheet Cam for my CNC plasma table. I know the cutting speed would be a ball park but just trying to get a baselne to get it dialed in. thanks for any help. A yes I did call Miller and they were less than helpful.. Don't know if I got a hold of the wrong person but no answers.
Reply:Cut a 1-2 inch sq. piece and measure the size.. Lets say you are cutting 1/8 MS at 40 amps.. Punch in something like .045-.050 kerf offset, and check the size of the piece.. It will get you a ballpark figure.. Save in the sheet-cam tool-set, and move on to other thicknesses and amps..Esab/Lorch ET-220iEsab 160i caddyThermal LM-200 Lincoln feedersThermal Pee-Wee 85sThermal 60i- 3phase /RPC powered (Beast)Thermal Drag-gun 35CINE 1500 Klutch 140i

Spot Welder for Miller Spectrum 875 Kerf width,Spot Welding Machine for Miller Spectrum 875 Kerf width, Laser Welder for Miller Spectrum 875 Kerf width, Laser Welding Machine for Miller Spectrum 875 Kerf width,Spot Welder manufacturer in China, Miller Spectrum 875 Kerf width Laser Welder manufacturer from China
go to see Welding Machine for Miller Spectrum 875 Kerf width