Accumulated services for 5000 + enterprises 65000 + welding workpiece cases Senior R & D and rapid service team three day rapid process samples national high tech enterprises 15 years of focus on welding field
China Compulsory Certification(3C) CE export certification 100% qualified inspection three years warranty of main frame 77 patented inventions ISO9001 international quality system certification
Spot welding, projection welding, seam welding, touch welding T joint, lap joint, corner joint,butt joint, edge joint
7*24 Online service
15 minutes quick response detailed operation instruction and video
Perfect pre-sale, in sale and after-sale service
Hello everyone i was wondering if anyone has any experience with this pulsing unit. i have a syncrowave 250 welds great but i also got the pulser box with it i hooked everything up properlly and use a on off thumb button. with the pulser box hooked up i can still weld normally with the box on but when i set the pulser on it will no pulse...any input or help would be appreciated. thanks
Reply:Make sure the welder switches are set to remote. Then make sure the switches on the pc 300 panel are set right. The switches allow the pc 300 to be master control, be bypassed for foot control only and when set right cause the welder to pulse. Down load the owners manual and make sure all the switches are set right. Start out by setting for a slow pulse. about 1/2 second on high then 1/2 second low. Remember panel control is still in circuit, so set it high, then you have all the levels at the pc 300 control. Once you get it pulsing at a slow pulse. you can turn up the speed and play with the other settings. If you can't get it to pulse the pc 300 may need repair. A switch or the pc board may be bad.
Spot Welder for
miller pc 300 issues,Spot Welding Machine for
miller pc 300 issues, Laser Welder for
miller pc 300 issues, Laser Welding Machine for
miller pc 300 issues,Spot Welder manufacturer in China,
miller pc 300 issues Laser Welder manufacturer from China go to see Welding Machine for miller pc 300 issues